Видео

Can you please do a video on microwaves and running them?

Well done fella that's interesting, good insight, cheers for that im sure alot of camping guys will appreciate your time bringing us this information 👍

Thanks for the idea. Great video. Question? where are the tie down points at the front of that rear area?

I have a separate google email for all this registration of products, as well as, gaming bs. These companies end up selling your email to various phishing companies. You should get a separate email for registrations, makes life way easier and you feel happy you got one up on any that sell your info. I like how you experiment and how you explain things, at first I thought I would need a drink to understand any of it, but once you demonstrated it, eureka 💡, I didn’t feel so dumb after all. Not saying I’m not, but at least I didn’t feeellll it. 😂

keen to hear your thoughts on it now a few months down the track and what do you see as the general amp draw

Yo brother thanks for your very informative video. I bought a "spector" induction cooktop from ebay and that pos makes my 3k inverter shut down from the spikes! Just ordered this same model "tokit" from their website, $177 delivered (from China, I expect). Also, I was speaking with a sparky today at work and he reckons those on-off spikes are really reducing the life of your inverter, battery, switches and everything connected to the device. Seems like a no-brainer to pay the extra $120 or so to prolong the life of your far more expensive devices.

Late to the show but got yourseld a new subscriber mate! Any follow on thoughts on this buffer mate?

the big question .. have you had it out in the wild yet ? how did it perform great video by the way @DENMONKEY

I’d be wearing a mask and wouldn’t be blowing air to disperse that dust.

Hey mate! Great video! Wondering how are those brass monkey fridges doing? Thanks!

❤

Talk about utube videos. This one is up there.😅

How many times you said James just wondering 😅( joke).. Thanks a lots great information 👍

@KAONaust @KAONaust @KAONaust

I envy your view!! Do you think a few finger sized sticks of river cane or bamboo could be easily lashed together to form a lightweight frame for this panel when camping? Rather than lashing, one could possibly fabricate some take-down fittings from PVC or EMT (It's what we call the thin walled electrical conduit in the US. Don't know what you fellas call it.) Cut short lengths of EMT, smash one end and pop rivet them together into Tees and Ells and Crosses to allow you to build a square with a few cross members. I think it could be done in a way that was fairly portable. What do you think? Would it still be too flimsy or not worth the effort?

Inverted the sump plate LOL wow. New Kaon plates look mint. Is anybody making the rear bar plates anymore? for protection against becoming a sand scoop?

Has anyone in the USA used this successfully without starting a fire? From what Iunderstand it is only designed for 100 volts Japanese current.

Looking forward to seeing the new caravan mate, and your right, absolutely hate the mud as well

Looking forward to seeing the new camper. Based on the way you test gear, I’m sure you have investigated it thoroughly and given due consideration before taking the plunge and purchasing it Cheers

Thank's for your review Good on yahh Brett Thank's for sharing

Gee, at 10:00, you're kind of hard on the gear, eh? 😉🤣

Strap looks familiar

Cool video Really like your truck, it’s world class and I love the turbo flutter sounds it makes. Did you upgrade your turbo! If so what did you get. Nice to see you go hard on the tracks and don’t pussy foot it. You’ve seen me Pajero videos haven’t you?

Hi Brett If the KAON's are lighter than the BOOS plates, does that mean they are thinner ans perhaps not as durable as the old ones?

Were those 3mm or 4mm Boos? I've had 4mm Boos for a while and just ordered the RHS to save some weight and also hopefully get some better airflow to the intercooler... The Kaon ones look great and I nearly bought them...

Love the videos Brett. Quick question. Why didn't you drive 1 metre forward so you were under the carport and didn't get wet 😋

We know you love the Mud Brett, stop pretending you don't lmfao. Also you are more than a little bit different lmfao. Kaon ones do look pretty good, I thought about them but ended up going the BushSkinz as I like their looks more. Lucky you didn't snap any of those old bolts when removing them. I snapped one of mine holding the front plate on. Pain in the rear and meant I had to re-tap the damn holes. I do like that the Kaons are recessed into the plate rather than exposed bolt heads.

I don't do mud either - Hate it because I cant see in it.

im really ater a decent cooktop and this looked great until it wants your phone to link up with it ...seriously im glad i dont have much longer to live becasue i swear in a few years time we will have to register each sheet of dunny paper before we use it and fill in a form saying what we had for dinner yesterday.

Thanks for your videos.I have learnt a lost. I Boiled some water with my induction cooker and it melted the On and off switch.😢

Regarding feedback when on phone -- It is a phone problem not your head unit because my phone and others that I know of have done feedback even when NOT connected to anything ! -- I am "told" it is to do with the carrier picking you up on two towers simultaneously

Thank you my Friend, what an amazing review of the Tokit unit!!! I just got mine today shipped from China (about 2 weeks) $120 free shipping. This is for sure the MackBook Air of Induction Cookers! Thanks Again 👍👍👍

Hi, this will charge the batties for my Stihl strimmer. 36v fast charger

100Ah or 100 Amp hour refers to storage capacity not drawing capacity. Most of these cheap batteries are only rated to draw 50 amps continuously. Thank you for covering these issues with cable sizing and continuous draw, people need to do a check over on all this gear before putting loads on it

Ha ha another way the ch inks are harvesting your data, f that one matey

Confirming all of those lines are 4mm ? Or are some 3?

Great video, following now thanks 😅

Cheapest build Kings😅 What do you expect Watch all the kings sales reps now trying to justify their existence 😂

5 years later and the batteries are still the same fit lol

I just purchased one of these to go with my voltx M3000 portable power station should work fine hung up on the side of my 2009 ford transit campervan

Hi, Your videos are very nice and Your content ideas are great. You already have 14.9k subscribers which is a big number. But the engagement in your videos is much lower due to which your videos are not going in front of your targeted audience and lose most of viewers and video rank. So, if you want to solve this problem get organic views and subscriptions daily. Then surely organically. I can help you. Can I share solutions?

“We’ve all heard lots of stories about Kings electronics and stuff catching fire…” at 8:43 and numerous petty little gripes and generalisations. Even calls Kings customers mentally defective drug users and on the piss…. at 15:12. This is as bad as these online time wasters get.

Great video, I'd be still swapping out those cables after getting them that hot, that cheap rubber coating can melt into the copper strands and cause more resistance & issues down the track.

Great review, you echoed my thoughts on their performance exactly having just upgraded(only just) myself to these from previous Lightforce LED215SD light purchased in 2018. The Beast lights are better, but I don't think I would of bought them if I could of tried them first. I only run them in beast mode (as this is the default if you use a standard heavy duty harness, my Beasts pull 26.6amps @ 13.93volts) and I feel they don't project any further down the road then the LED215SD (which are very good already), the Beasts do spread the light wider and more evenly, which is more important to me. The colour temp of the Beasts are whiter and as a result more gentler on the eyes from the road sign reflections. I also thought the mounting system appeared to be a step backward from the previous big stainless brackets of the LED215SD's, time will tell with this one. Overall I was expecting more from the $1200 cost to upgrade... If I had no spots previously they may worth the investment from the quality, warranty and Australian made perspective. I was also disappointed that Lightforce don't have the install instructions on the their website, presumably to make you think you need to buy their harness to make them work,(which you do if you want to switch modes, however I don't), full power to all of the light all of the time is what I want when they are on. On a side note the still perfectly good 6 year old LED215SD's can now go on the second car. Cheers.

As a fellow Aussie, the second you used imperial units, i stopped caring what you had to say. 😞

Did you try dc stoves to save the consumption of the dc to ac converter?

Hi Mate, great video as usual. What do you run for your high beam? Thanks

Would love to see a review of the Bluetti AC180 for extra power which i am thinking of getting to run Brass Monkey 30ltr Fridge and a Phillips Dream Station CPAP Machine (without humidifyer)for trips away. Portable Solar Panels would be a possible addition later but not sure. Not normally sitting around campsite to get the better input from the panels and driving around won't give me much from the cig charger. Only have an SUV so love the portability of these units but unsure of what's left after running the above products and any advice would be appreciated. Love the video's, keep them coming

Hi! If my power station has Anderson charging characteristics 18-30 Wt 8A max, is this solar panel Ok with power 11A to my station? Or 8A and 11A is crucial and will damage station or panel ?

Happy birthday mate, really impressed with the spread beam on the light, another great review